Sign-On Vs. Stored Credentials; To Use Stored Credentials - Honeywell Thor VM2 User Manual

Sign-On vs. Stored Credentials

When using wireless security that requires a user name and password to be entered, the
Summit Client Utility offers these choices:
•
•

To Use Stored Credentials

1. After completing the other entries in the profile, click on the Credentials button.
2. Enter the Username and Password on the Credentials screen and click the OK
3. Click the Commit button.
4. For LEAP and WPA/LEAP, configuration is complete.
5. For PEAP-MSCHAP and PEAP-GTC, importing the CA certificate into the Windows
6. For EAP-TLS, import the CA certificate into the Windows certificate store. Also
7. Access the Credentials screen again. Make sure the Validate server and Use MS
8. The default is to use the entire certificate store for the CA certificate. Alternatively,
9. For EAP-TLS, also enter the User Cert (User Certificate filename) on the credentials
10. If using EAP FAST and manual PAC provisioning, input the PAC filename and
11. Click the OK button then the Commit button.
12. If changes are made to the stored credentials, click Commit to save those changes
13. Verify the device is authenticated by reviewing the Status tab. When the device is
Note: See
Note: If invalid credentials are entered into the stored credentials, the authentication will fail. No
error message is displayed. The user may or may not be prompted to enter valid
credentials.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
The Username and Password may be entered on the Credentials screen. If this
method is selected, anyone using the device can access the network.
The Username and Password are left blank on the Credentials screen. When the
device attempts to connect to the network, a sign on screen is displayed. The user
must enter the Username and Password at that time to authenticate.
button.
certificate store is optional.
import the User Certificate into the Windows certificate store.
store checkboxes are checked.
use the Browse button next to the CA Cert (CA Certificate Filename) on the
Credentials screen to select an individual certificate.
screen by using the Browse button.
password.
before making any additional changes to the profile or global parameters.
property configured, the Status tab indicates the device is Authenticated and the
method used.
Configuring the Profile for more details.
315