User Interface; Enabler Configuration - Honeywell Thor VM2 User Manual

User Interface

The Enabler can be configured and controlled manually through the user interface on
the Thor VM2. This section details the functionality that can be controlled by the user or
system administrator.
Screen displays shown in this section are designed to present the end-user with infor-
mation graphically.
Placement of information on the screen displays may be split between one or many
tabbed panels.
Standard Avalanche Enabler parameters that are not supported by Honeywell may be
missing or dimmed (visible but unable to be edited) on the tabbed panels or screen dis-
plays.

Enabler Configuration

Depending on the version of the Enabler running on the Thor VM2, the desktop Enabler
icon may look like one of the following:
The available configuration options and tabs may vary by Enabler version. The exam-
ples shown in this section assume the latest version of the Enabler is installed on the
Thor VM2.
The Enabler user interface application is launched by clicking either the Enabler icon
on the desktop or Taskbar or by selecting Avalanche Enabler from the Programs menu.
The opening screen presents the Thor VM2 user with the connection status and a navi-
gation menu.
282 Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide