Global - Honeywell Thor VM2 User Manual

•
•
•

Global

Start > Programs > Summit > Global tab
The parameters on this panel can only be changed when a logged in with the admin
password. The current values for the parameters can be viewed by the general user
without requiring a password.
Note: Tap the Commit button to save changes. If the panel is exited before tapping the Commit
button, changes are not saved!
Factory Default Settings
Roam Trigger
Roam Delta
Roam Period
BG Channel Set
DFS Channels
DFS Scan Time
Ad Hoc Channel
Aggressive Scan
CCX Features
WMM
Auth Server
TTLS Inner
Method
PMK Caching
WAPI
TX Diversity
RX Diversity
Frag Threshold
RTS Threshold
LED
310
Start Ping – Start a continuous ping to the IP address specified in the text box to the
right of this button. Once the button is clicked, the ping begins and the button label
changes to Stop Ping. Clicking the button ends the ping. The ping also ends when
any other button on this screen is clicked or the user browses away from the Diags
tab. The results of the ping are displayed in the Diagnostic Output box.
Diagnostics – Also attempts to (re)connect to the wireless LAN. However, this option
provides more data in the Diagnostic Output box than the (Re)connect option. This
data dump includes radio state, profile settings, global settings, and a list of
broadcast SSID APs.
Save To... – Use this to save the results of the diagnostics to a text file. Use the
explorer window to specify the name and location for the diagnostic file. The text file
can viewed using an application such as WordPad.
-65 dBm
5 dBm
10 sec.
Full
Off
120 ms.
1
On
ABG: Optimized
Off
Type 1
Auto-EAP
Standard
Off (dimmed)
On
On Start on Main
2346
2347
Off
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide