Honeywell Thor VM2 User Manual page 381

Vehicle-mounted computer with microsoft windows embedded ce 6.0
Hide thumbs Also See for Thor VM2:
Table of Contents

Advertisement

Message
Exit verify password-no
pwd set
Exit verify password-
response from dialog
Found taskbar
Getting address of
keyboard hook init
procedure
Getting configuration
from registry
Getting encrypt pwd
length
Hook wndproc failure
Hook wndproc of open
app failure
Hot key event creation
failure
Hot key pressed
Hot key pressed
Hot key set event failure
Hotkey press message
received
In app hook:WM_SIZE
In app
hook:WM_WINDOWPOS
CHANGED
Initializing keyboard
hook procedure
Keyboard hook
initialization failure
Keyboard hook loaded
OK
L after Ctrl
Loading keyboard hook
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
Explanation and/or corrective action
Exiting password verification.
Exiting password verification.
The handle to the taskbar has been found so that AppLock
can disable it in user mode.
AppLock is retrieving the address of the keyboard hook.
The AppLock configuration is being read from the registry.
This occurs at initialization and also at entry into user mode.
The registry must be re-read at entry into user mode in case
the administration changed the settings of the application
being controlled.
The length of the encrypted password is being calculated.
AppLock is unable to lock the application. This could happen
if the application being locked encountered an error after
performing its initialization and shut itself down prior to being
locked by AppLock.
The application is open, but AppLock cannot lock it.
The Admin applet is unable to create the hotkey notification.
Processing the hotkey and backdoor entry
Processing the hotkey and backdoor entry
When the administrator changes the hotkey configuration the
hotkey controller must be notified. This notification failed.
The user just pressed the configured hotkey.
In addition to preventing the locked application from exiting,
AppLock must also prevent the application from enabling the
taskbar and resizing the application's window. This message
traps a change in the window size and corrects it.
In addition to preventing the locked application from exiting,
AppLock must also prevent the application from enabling the
taskbar and resizing the application's window. This message
traps a change in the window position and corrects it.
AppLock is calling the keyboard hook initialization.
The keyboard filter initialization failed.
The keyboard hook dll exists and loaded successfully.
Processing the backdoor entry.
When AppLock first loads, it loads a dll that contains the
keyboard hook processing. This message is logged prior to
the load attempt.
Level
LOG_
PROCESSING
LOG_
PROCESSING
LOG_
PROCESSING
LOG_
PROCESSING
LOG_
PROCESSING
LOG_EX
LOG_ERROR
LOG_ERROR
LOG_ERROR
LOG_EX
LOG_EX
LOG_ERROR
LOG_
PROCESSING
LOG_EX
LOG_EX
LOG_
PROCESSING
LOG_ERROR
LOG_EX
LOG_EX
LOG_
PROCESSING
369

Advertisement

Table of Contents
loading

Table of Contents