Prepare For Vehicle Mounting; Quick Start - Honeywell Thor VM2 User Manual
Vehicle-mounted computer with microsoft windows embedded ce 6.0
Hide thumbs
Also See for Thor VM2:
- User manual (366 pages) ,
- Reference manual (196 pages) ,
- Quick start manual (12 pages)
Table of Contents
Advertisement
Overhead, dash and roof support pillar mounting is via a RAM Mount or U-bracket
accessory which includes all the hardware required for vehicle mounting.
Never put the Thor VM2 into the vehicle mounted assembly until the assembly is
securely fastened to the vehicle.
Prepare for Vehicle Mounting
The Thor VM2 should be secured to an area in the vehicle where it:
•
•
•
•
Quick Start
The following list outlines, in a general way, the process to follow when mounting the
Thor VM2 in a vehicle. Refer to the following sections in this document for more details.
1.
2.
3. Secure accessories such as an optional external keyboard or a scanner holder to
4. Adjust the Thor VM2 to the best viewing angle.
5.
6.
7. Connect vehicle power:
8. Secure all cables in
The Thor VM2 is ready for use.
54
Does not obstruct the driver's vision or safe vehicle operation.
Will be protected from rain or inclement weather.
Will be protected from extremely high concentrations of dust or wind-blown debris.
Can be easily accessed by a user seated in the driver's seat while the vehicle is not in
operation.
Install RAM Mount
or
Place Thor VM2 in the
either an integrated or remote mounting bracket.
Install Remote Antenna
Connect Cables
for any peripherals.
•
12-48 VDC Vehicles (10-60 VDC Direct Connection)
•
60-144 VDC Vehicles (50-150 VDC Power Supply, Screws on Top of Lid)
•
60-144 VDC Vehicles (50-150 VDC Power Supply, Screws on Side of
•
Thor VX8 / Thor VX9 Adapter Cable
•
VX6 / VX7 Adapter Cable
Strain Relief Cable
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
Install U Bracket Mount
Dock.
or
Install External Antenna
Clamps.
to the vehicle.
if necessary.
Lid).
Advertisement
Table of Contents
