Power - Honeywell Thor VM2 User Manual

Power

Start > Settings > Control Panel > Power
The Thor VM2 power mode timers are cumulative.
The System Idle timer begins the countdown after the User Idle timer has expired and
the Suspend timer begins the countdown after the System Idle timer has expired.
When the User Idle timer is set to "Never", the power scheme timers never place the
device in User Idle, System Idle or Suspend modes (even when the device is idle).
The Display > Backlight setting is synchronized with the User Idle setting in the
Schemes tab in the Power control panel.
Factory Default Settings
Battery
Schemes
User Idle
Timeout
System Idle
Timeout
Suspend
Timeout
Shutdown
Timeout
Device Status
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
No user interaction
The default power schemes are
AC/DC Ignition
Control/
Ignition On
15 minutes 15 minutes
1 hour 1 hour
8 hours 8 hours
Never Never
No user interaction
Ignition Auto On
Control/
Ignition Off
1 minute 15 minutes
5 minutes 1 hour
1 hour 8 hours
8 hours Never
UPS
30 seconds
1 minute
10 minutes
20 minutes
235