Honeywell Thor VM2 User Manual page 203

Data Options - Symbology Settings
Start > Settings > Control Panel > Data Collection > Data Options tab > Symbology
Settings button
The Symbology selected in the Symbology drop-down list defines the symbology for
which the data is being configured. The features available on the Symbology panel
include the ability to
•
•
•
•
•
The Code ID drop-down box only filters the available symbologies in the Symbology
drop down box by the selected Code ID. This Code ID box does not enable or disable the
Code ID as that function is controlled by the Enable Code ID box on the Data Options
tab.
The Symbology drop-down box contains all symbologies supported based on the Code
ID selected above. An asterisk appears in front of symbologies that have already been
configured or have been modified from the default value.
Each time a Symbology is changed, the settings are saved as soon as the OK button is
tapped. Settings are also saved when a new Symbology is selected from the Symbology
drop-down list.
The order in which these settings are processed are:
•
•
•
•
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
individually enable or disable a bar code from scanning,
set the minimum and maximum size bar code to accept,
strip Code ID,
strip data from the beginning or end of a bar code,
or (based on configurable Bar Code Data) add a prefix or suffix to a bar code.
Min / Max
Code ID
Leading / Trailing
Bar Code Data
191