Antenna Connections - Honeywell Thor VM2 User Manual

Antenna Connections

External Antenna Connector
Internal 802.11 Antenna
If the internal 802.11 antenna option is ordered, antennas are mounted inside the Thor
VM2. The internal antennas are not user accessible.
External 802.11 Antenna
An external whip antenna can be connected to the Wi-Fi antenna connections on the
back of the Thor VM2 for the 802.11 radio. Two external antennas are used for radio
diversity.
See
Vehicle Remote Antenna
The external antennas can be remotely mounted on the vehicle. See
Antenna
GPS and WWAN.
38
1 2
When the Thor VM2 is ordered with the internal antenna option, the
802.11 antenna connectors on the back are not connected to the
802.11 radio. Instead the internal antenna connector is connected to
the 802.11 radio.
Remove the rubber cap, if present, from the antenna connector before
connecting an external antenna.
Install External Antenna
for instructions. External antenna kits are available for the 802.11 Wi-Fi radio,
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
The Thor VM2 is equipped with an 802.11 radio
3 4
and can be ordered with internal antennas,
external antennas or external remote mount
antennas. When the Thor VM2 is ordered with
internal antennas, the external antenna con-
nectors are not used. GPS and WWAN are
optional on the Thor VM2 and require external
remote mount antennas.
1. WI-FI (MAIN) (Red label) 802.11 Main
External Antenna Connector
2. GPS (Green label) GPS Antenna Connector
3. MOBILE NET (Blue label) WWAN Antenna
Connector
4. WI-FI (AUX) (Yellow label) 802.11 Auxiliary
External Antenna Connector
for instructions.
Install Remote