HEIDENHAIN MANUALplus 620 Technical Manual page 1794

Hide thumbs Also See for MANUALplus 620:

9.10.1 Selective parameter backup

Configuration of

backup lists

Settings in the configuration editor

CfgBackupGroup

[Key name of the backup list]

For parameter backups that are started with the Parameter Backup soft key in

the Transfer mode of operation, you can configure any file lists in CfgBackup,

and save them under a unique key name on the control.

When starting the parameter backup, in a dialog box you can individually select

all defined file lists via their key names. Parameter backups can now be carried

out separately for machine parameters and PLC parameters, for example.

In MP_groupList under CfgBackup, define the desired key names for all of the

backup lists you want to create.

In a second step, you have to enter these key names under CfgBackupGroup

and assign configuration files to each backup list by means of

MP_backupFiles. To do so, enter in MP_backupFiles the paths to the desired

configuration files instead of the absolute paths by using the placeholders

%oemPath% and %usrPath%.

The key names of the backup lists and the associated configuration file lists

can be expanded as desired in the configuration editor with these machine

MP_groupList

List with the key names of all backup lists

Available from NCK software version: 597 110-05.

Array [0...12]

Enter the key names of all backup lists.

No value, parameter optional

MP_backupFiles

List with the paths to the configuration files

Available from NCK software version: 597 110-05.

Array [0...40]

Enter the paths to the configuration files using the placeholders

%oemPath% and %usrPath%.

No value, parameter optional

HEIDENHAIN Technical Manual MANUALplus 620