HEIDENHAIN MANUALplus 620 Technical Manual page 1600

Hide thumbs Also See for MANUALplus 620:

Select MP_lockValue (optional);

If the value entered in the column equals the value given here, the text in

MP_text is displayed. It can no longer be edited. This way editing can be

disabled depending on the value.

Select MP_value (optional); enter the value for MP_dialog.

Select MP_dialog (optional);

(MP_dialogRes in preparation);

Select MP_text (optional); enter the text for MP_value.

(keep MP_width in mind)

Select CfgColumnText; enter the dialog text for the columns.

Carry out the above procedure for all new columns, and save the information

with the SAVE soft key.

The following machine parameters are used for defining the columns.

Column width

Available from NCK software version: 597 110-01.

Numerical value

2 to 50 (column width of max. 50 characters)

HEIDENHAIN Technical Manual MANUALplus 620