HEIDENHAIN MANUALplus 620 Technical Manual page 1657

8.13.3 Data transfer machine parameters => PLC
January 2012
Settings in the configuration editor
System
PLC
CfgOemBool
[Key name of arbitrary parameter]
value
ignorePlc
CfgOemInt
[Key name of arbitrary parameter]
value
ignorePlc
CfgOemString
[Key name of arbitrary parameter]
value
ignorePlc
CfgOemPosition
[Key name of arbitrary parameter]
value
ignorePlc
Freely definable machine parameters are available for data transmission to the
PLC. The control saves the contents of the machine parameters in PLC words.
In the machine parameters you can save, for example, values for PLC
positioning movements and datum shifts, feed rates for PLC positioning
movements or codes for the enabling of certain PLC functions or user texts
for OEM cycles. You must evaluate the transferred characters and numerical
values in your PLC program.
The freely definable machine parameters are divided into three groups:
CfgOemBool:
User parameters with logical values (TRUE, FALSE or ON, OFF)
CfgOemInt:
User parameters with integer values (whole numbers)
CfgOemString
User parameters with text data (lists with max. 9 strings, character length
max. 100)
CfgOemPosition:
User parameters with fixed decimal values (position values)
If a parameter from CfgOemPosition is opened in the configuration editor
(Machine Parameter Programming mode of operation), you can use the
ACTUAL POSITION CAPTURE soft key to automatically capture the position
value of an axis.
The soft key displays a soft-key row showing the available axes. When you
press an axis soft key, the MANUALplus 620 captures the position of the
axis in the REFNOML system.
8.13 Data Transfer NC => PLC, PLC => NC
MP
number
104501
104502
104601
104602
104901
104902
104701
104702
1657