HEIDENHAIN MANUALplus 620 Technical Manual page 1597

Hide thumbs Also See for MANUALplus 620:

Table description

January 2012

Disable file types

Available from NCK software version: 597 110-04.

Selection menu

File type not locked

LOCK_SOFTKEY

Lock the SELECT TYPE soft key for selection of the file type

LOCK_FILETYPE

Lock file types from editing

Lock the SELECT TYPE soft key for selection of the file type and

lock the file type to prevent editing

Specify in the configuration editor which columns are used in a table.

Enter the code number 95148.

Press the CONFIG DATA soft key.

Select the object System/TableSettings/CfgTableProperties.

Press the INSERT soft key.

Enter the extension of the new table;

Specify the file (memory file) in which the configuration data are to be saved

(normally PLC:\config\oemtable.cfg)

Confirm with OK.

Select MP_columnKeys.

Enter the first column name in the field [0];

The name is in the following format: Tableextension.Columnname.

The column name must not have any other periods, commas or special

characters. Hyphens are permitted.

For columns used with the same meaning in different tables, only the

column name needs to be given. Examples of such columns are the

columns predefined by HEIDENHAIN, such as NAME or NR.

The table extension must always be entered in uppercase letters.

Use the INSERT soft key to create more columns according to the above

Confirm with OK.

Select MP_primaryKey and assign the column name (name from

MP_columnKeys).

Confirm with OK.

Press the SAVE soft key to save the data.