HEIDENHAIN MANUALplus 620 Technical Manual page 1791

January 2012
MP_host
Network address or host name of the remote service host
Available from NCK software version: 597 110-03.
Format: String
Input: Max. 500 characters
Enter the network address as four decimal numbers separated
by periods (IP address in dotted-decimal notation) or as a fully
qualified host name, e.g.:
192.168.10.51
\HOME\DATA\SERVICE
Default: No value, parameter optional
Access: LEVEL2
Reaction: NOTHING
MP_port
Port number of the remote service host
Available from NCK software version: 597 110-03.
Format: Numerical value
Input: Initial value: 19001
The control sends the service request report to the port entered
here.
Default: No value, parameter optional
Access: LEVEL2
Reaction: NOTHING
MP_content
Contents of the message to the remote service host
Available from NCK software version: 597 110-03.
Format: String
Input: Max. 500 characters
The contents serve to identify the machine, e.g. machine model
and serial number.
Default: No value, parameter optional
Access: LEVEL2
Reaction: NOTHING
MP_period
Duration of repeated transmission of the message to the
service host
Available from NCK software version: 597 110-03.
Format: Numerical value
Input: 0 to 10 [s]
Transmission of the report is repeated during the specified
period of time in seconds until the function is activated or the
time entered in the MP_timeOut parameter is exceeded.
Default: No value, parameter optional
Access: LEVEL2
Reaction: NOTHING
9.9 Configuring the Control for TeleService 2.0 1791