Configuring The Maxpro Nvr; Verifying The Configuration - Honeywell MAXPRO NVR Hybrid XE Installation And Configuration Manual

C O M M I S S I O N I N G M A X P R O N V R
2
Steps in the Commissioning Procedure
The following steps are involved to install the MAXPRO NVR software on a 3rd party hardware:
1.
2.
Caution:
See the
requirements and installation instructions for the MAXPRO NVR software.

Configuring the MAXPRO NVR

In this phase, you need to configure the MAXPRO NVR through the user interface. Configuring
MAXPRO NVR includes the following:
See the
the MAXPRO NVR system.

Verifying the Configuration

Verifying the configuration involves checking whether the surveillance operations can be
performed using MAXPRO NVR. Surveillance operations include: viewing the live video,
performing the pan, tilt, and zoom on the video, and starting the video recording.
See the
verification.
54
The server and client computers meet the minimum hardware and software requirements.
Installing the MAXPRO NVR software.
Don't install any Email client on the MAXPRO NVR server machine.
MAXPRO NVR Software Installation
• Configuring the Honeywell cameras with MAXPRO NVR Wizard
• Configuring the system level settings
• Configuring the disk management settings
• Configuring the schedule based recording for cameras
• Performing user administration
Configuring MAXPRO NVR
Verifying the Configuration
section on page 73
section on page 119 for information on how to configure
section on page 239 for information on how to perform the
MAXPRO NVR 5.6 Installation and Configuration Guide
for information on software