Device Range That Can Be Set - Mitsubishi Electric GOT2000 Series Connection Manual

10.4 Device Range that Can Be Set

The device ranges of controller that can be used for GOT are as follows.
Note that the device ranges in the following tables are the maximum values that can be set in GT Designer3.
The device specifications of controllers may differ depending on the models, even though belonging to the same series.
Please make the setting according to the specifications of the controller actually used.
When a non-existent device or a device number outside the range is set, other objects with correct device settings may not
be monitored.
■1. Setting item
(1) AB Control/CompactLogix
Item
Device
Information
Network
Switch to the tag
list dialog
10 - 32
10.4 Device Range that Can Be Set
Set the device name, file number, element number, and bit number.
The bit number can be set only when specifying the bit of word device.
Displays the device type and setting range which are selected in [Device].
Set the station number of the PLC connected to the specified device.
Host Select this item when monitoring the host PLC.
Select this when monitoring the other PLCs.
After selecting, set the station number of the PLC to be monitored.
Other
NWNo.: Set the network No.
Station No.: Set the station No.
Select this button to importing the tag file created by RSLogix5000 and set devices while checking the tag names.
For how to import tag files, refer to the following.
➠
GT Designer3 (GOT2000) Screen Design Manual
Description