[PRECAUTIONS FOR REMOTE CONTROL]
Remote control is available through a network by using GOT functions, including theSoftGOT-GOT
link function, the remote personal computer operation function, the VNC server function, and the
GOT Mobile function.
If you remotely operate control equipment using such functions, the field operator may not notice the
remote operation, leading to an accident.
In addition, a communication delay or interruption may occur depending on the network
environment, and remote control of control equipment cannot be performed normally in some cases.
Before using the above functions to perform remote control, fully grasp the circumstances of the field
site and ensure safety.
When operating the server (GOT) of the GOT Mobile function to disconnect a client, notify the
operator of the client about the disconnection beforehand.
Not doing so may cause an accident.
[PRECAUTIONS FOR EXCLUSIVE AUTHORIZATION CONTROL]
Before using the GOT network interaction function to prevent simultaneous operations from multiple
pieces of equipment, make sure you understand the function.
You can enable or disable the exclusive authorization control of the GOT network interaction function
for each screen. (For all screens, the exclusive authorization control is disabled by default.)
Properly determine the screens for which the exclusive authorization control is required, and set the
control by screen.
A screen for which the exclusive authorization control is disabled is operable simultaneously from
multiple pieces of equipment. Make sure to determine the operation period for each operator, fully
grasp the circumstances of the field site, and ensure safety to perform operations.
[PRECAUTIONS FOR USE]
Do not touch the edges of the touch panel (display section) repeatedly.
Doing so may result in a failure.
Do not turn off the GOT while data is being written to the storage memory (ROM) or SD card.
Doing so may corrupt the data, rendering the GOT inoperative.
The GOT rugged model uses the environmental protection sheet (not replaceable) with UV
protection function on the front surface.
Therefore, it is possible to suppress deterioration of the touch panel or the liquid crystal display panel
that may be caused by ultraviolet rays.
Note that if the rugged model is exposed to ultraviolet rays for an extended period of time, the front
surface may turn yellow.
If the rugged model is likely to be exposed to ultraviolet rays for an extended period of time, it is
recommended to use a UV protective sheet (option).
A - 11