Mitsubishi Electric GOT2000 Series Connection Manual page 201

■2. Communication detail settings
Make the settings according to the usage environment.
(For GT27, GT25, GT23)
Item
Transmission Speed
Data Bit
Stop Bit
Parity
Retry
Startup Time
Timeout Time
Host Address
Delay Time
Description
Set this item when change the transmission speed used for communication
with the connected equipment.
(Default: 19200bps)
Set this item when change the data length used for communication with the
connected equipment.
(Default: 8bit)
Specify the stop bit length for communications.
(Default: 1bit)
Specify whether or not to perform a parity check, and how it is performed
during communication.
(Default: Even)
Set the number of retries to be performed when a communication error
occurs.
(Default: 0time)
Specify the time period from the GOT startup until GOT starts the
communication with the PLC CPU.
(Default: 3sec)
Set the time period for a communication to time out.
(Default: 3sec)
Specify the host address (station No. of the PLC to which the GOT is
connected) in the network of the GOT.
(Default: 1)
Set this item to adjust the transmission timing of the communication request
from the GOT.
(Default: 0ms)
Range
4800bps,
9600bps,
19200bps,
38400bps,
57600bps
8bit (fixed)
1bit (fixed)
Even (fixed)
0 to 5times
3 to 30sec
1 to 30sec
1 to 31
0 to 300 (ms)
6.2 Serial Connection
6
6 - 19