Got Side Settings - Mitsubishi Electric GOT2000 Series Connection Manual

10.3.4

GOT Side Settings

■1. Setting communication interface (Communication settings)
Set the channel of the connected equipment.
Step 1.
Select [Common]
Step 2.
In the [Controller Setting] window, select the channel No. to be used from the list menu.
Step 3.
Set the following items.
• [Manufacturer]: [AB]
• [Controller Type]: Depends on the Ethernet connection type.
EtherNet/IP (AB MicroLogix): [AB MicroLogix]
EtherNet/IP (AB): [AB Control/CompactLogix]
EtherNet/IP (AB Tag): [AB Control/CompactLogix (Tag)]
• [I/F]: [Ethernet:Multi]
• [Detail Setting]: Configure the settings according to the usage environment.
➠ ■2.
Step 4.
When you have completed the settings, click the [OK] button.
10 - 24
10.3 Ethernet Connection
2.
[Controller Setting] from the menu.
Communication detail settings
POINT POINT POINT
The settings of connecting equipment can be confirmed in [I/F Communication Setting].
For details, refer to the following.
➠ 1.1.3 I/F communication setting
3.
Click!