Plc Side Setting (Cp-9200Sh Series, Cp-312, Cp-317 Series) - Mitsubishi Electric GOT2000 Series Connection Manual

6.3.5

PLC side setting (CP-9200SH series, CP-312, CP-317 series)

■1. Parameter settings
Make the parameter settings with a peripheral tool.
(1) Settings for CP-218IF
Module Type
CPU Number
Circuit Number
Hot Swapping
Item
Local Port
Node IP
*1
Address
Node
*1
Port
Connection
Type
Protocol
Type
Code
*1 Be sure to set the values above for the address so that the GOT communicates with the programmable controller correctly.
For the Host Address setting on the GOT side, refer to the following.
➠
(2) Settings for CP-218IF
Transmission parameter setting
Connection parameter setting
POINT POINT POINT
YASKAWA PLC
For details of YASKAWA PLCs, refer to the following manuals.
➠ YASKAWA PLC user's Manual
Item
CNO 03
10500
192.168.001.018
05016
TCP
Extended MEMOBUS
BIN
6.3.3 ■4. Connected Ethernet Controller Setting
Item
IP Address
Response Time
Count of Retry (Number of Retries)
Connection Number
Local Port
Node IP Address
Node Port
Connection Type
Protocol Type
Code
Node Name
Set value
CP-218
01
01
CNO 04
10501
192.168.001.020
05017
TCP
Extended MEMOBUS
BIN
Set value
IP address for 218TXB
Not required
Not required
1
10500
Local IP address of GOT
Local port No. of GOT
UDP
Extended MEMOBUS
BIN
Any string
6.3 Ethernet Connection
CNO 05
10030
192.168.001.073
21001
UDP
Extended MEMOBUS
BIN
6 - 35
6