Mitsubishi Electric GOT2000 Series Connection Manual page 395

(2) AB MicroLogix
Item
Transmission Speed
Sum Check Type
*1
Adapter Address
*1
Host Address
*1 Do not specify the same value for the adapter address and host address.
Description
Set this item when change the transmission speed used for
communication with the connected equipment.
(Default: 19200bps)
Specify the format in which the sum check is performed during
communication when performing sum check.
(Default: BCC)
The adapter address is to be specified depending on the connection type.
<In direct CPU connection>
The address of the connected PLC
<In connection via Adapter(1770-K3)>
The address of the adapter
(Default: 0)
The host address is to be specified depending on the connection type.
<In direct CPU connection>
Optional address
<In connection via Adapter(1770-K3)>
The address of the PLC of the system configuration
(Default: 1)
Range
4800bps,
9600bps,
19200bps,
38400bps
BCC, CRC16
0 to 63
0 to 63
10.2 Serial Connection
10
10 - 15