Mitsubishi Electric GOT2000 Series Connection Manual page 12

[PRECAUTIONS FOR USING A DATA STORAGE]
Do not remove the data storage from the GOT while the data storage is being accessed by the GOT,
or the data storage and files may be damaged.
Before removing the data storage, check the SD card access LED, relevant system signal, or others
to make sure that the data storage is not being accessed.
Turning off the GOT while it accesses the SD card results in damage to the SD card and files.
When using the GOT with an SD card inserted, check the following items.
• GT27, GT25, GT23 (Except for GT2505)
When inserting a SD card into the GOT, make sure to close the SD card cover.
Not doing so causes the data not to be read or written.
• GT2505-V
Before inserting an SD card into the GOT, turn on the SD Card Access Switch.
Not doing so causes the data not to be read or written.
• GT21, GS21
When inserting an SD card into the SD card unit, make sure to enable the SD card access in the
GOT utility in advance.
Not doing so causes the data not to be read or written.
[PRECAUTIONS FOR USING A DATA STORAGE]
When removing the SD card from the GOT, make sure to support the SD card by hand as it may pop
out.
Not doing so may cause the SD card to drop from the GOT, resulting in a failure or break.
When inserting a USB device into a USB interface of the GOT, make sure to insert the device into
the interface firmly.
Not doing so may cause the USB device to drop from the GOT, resulting in a failure or break. (GT27,
GT25, and GT2107-W)
Before removing the USB device from the GOT, follow the procedure for removal on the utility screen
of the GOT.
After the successful completion dialog is displayed, remove the USB device by hand carefully.
Not doing so may cause the USB device to drop from the GOT, resulting in a failure or break.
A - 10
CAUTION
CAUTION