Mitsubishi Electric GOT2000 Series Connection Manual page 468

13.6 DEVICE RANGE THAT CAN BE SET
The device ranges of controller that can be used for GOT are as follows.
Note that the device ranges in the following tables are the maximum values that can be set in GT Designer3.
The device specifications of controllers may differ depending on the models, even though belonging to the same series.
Please make the setting according to the specifications of the controller actually used.
When a non-existent device or a device number outside the range is set, other objects with correct device settings may not
be monitored.
■1. Setting item
Item
Device
Information
Network
■2. Device Range
Input (IX)
Bit device Output (QX)
Marker BOOL (MX)
Input (IW)
Output (QW)
Word device
Marker (MW)
System Word (SW)
*1
13 - 14
13.6 DEVICE RANGE THAT CAN BE SET
Set the device name, device number, and bit number.
The bit number can be set only by specifying the bit of word device.
Displays the device type and setting range which are selected in [Device].
Set the monitor target of the set device.
Station No.
Device name
*1
Some System Word devices are read-only.
For details, refer to the following.
➠
MITSUBISHI ELECTRIC INDIA PLC user's Manual
Description
Select this item when monitoring the PLC of the Station No. (1 to 247) specified.
Setting range available
IX0.0 to IX255.7
QX0.0 to QX255.7
MX0.0 to MX8191.7
W0 to IW254
QW0 to QW254
MW0 to MW32254
SW0 to SW468
Device No. representation
Decimal + Octal
Hexadecimal