Add Wave Files; Listen To Wave Files; Remove Wave Files; Edit Templates - Bosch Plena Software Manual

Plena Voice Alarm System | Software Manual | Messages
6.3.2

Add wave files

Proceed as follows:
1 Go to the first empty line in the list. Wave files can
only be added to the bottom of the list.
2 Click the Browse button. A window similar to the
one in figure 6.3 appears.
figure 6.3: Add wave files, step 2
3 Select the wave file and click the Open button to add
the wave file and its properties to the list.
6.3.3

Listen to wave files

Proceed as follows:
1 Click the > button in the Play field of a wave file to
listen to the wave file.
6.3.4

Remove wave files

Proceed as follows:
1 Click the Delete button to delete the wave file from
the list. The wave file itself is not deleted from the
PC.
Note
Only the last wave file in the list can be deleted.
The Delete buttons of the other wave files are
not available.
Bosch Security Systems | 2005-10 | 9922 141 10384 en
6.4

Edit templates

6.4.1

Overview

See figure 6.4 for an overview of the Edit mergeable
message templates window.
figure 6.4: Edit mergeable message templates
Each template has eight positions (1 to 8). To each of
the positions a wave file can be assigned (orange) or a
variant (Variant, green). In a later stage, when the actual
message is created, a wave file is assigned to the variant.
This makes it possible to create a number of similar
messages.
en | 25