6.15 Copying a seam program or sequence
You can also copy seam programs or sequences from a USB key to the
control or from the control to a USB key.
Important
Not all commonly available USB keys are suitable for the copying process.
You can obtain a suitable USB key from Dürkopp Adler using the part
number 9805 791113.
To copy a seam program or sequence:
1. Tap the menu items
The window for selecting the file to be copied appears:
Fig. 98: Copying a seam program or sequence
(1) - Select the source to be copied
2. Use the buttons (1) to select whether the data is to be copied from the
The selected button is highlighted with a dark background.
Information
You can use the
more manageable ( p. 100).
3. Tap the desired file.
The selected file is highlighted with a dark background.
4. Tap the Datei kopieren (Copy File) button.
The selected file is copied to the USB key or the control.
117
Datei (File)
①
DAC control or the USB key.
A selection window (2) lists all files present at this location.
Dateifilter (File Filter)
>
Kopieren (Copy)
(2) - File selection window
to make the list
Service Instructions 911-211 - 02.0 - 10/2016
Programming
.
②