Programming
4. Enter the desired name and adopt the change by pressing
The seam program or seam sequence is now available under this
5.10.7 Copying a seam program or seam sequence
You can also copy seam programs or seam sequences from a USB key
to the control or from the control to a USB key.
Important
Not all commonly available USB keys are suitable for the copying process.
You can obtain a suitable USB key from Dürkopp Adler.
To copy a seam program or a seam sequence:
1. Press the menu items
The window for selecting the file to be copied appears:
Fig. 46: Copying a seam program or seam sequence
(1) - Select the source to be copied
2. Use the buttons (1) to select whether the data is to be copied from
The selected button is highlighted with a dark background.
Information
You can use the
( p. 42).
3. Press the desired file.
The selected file is highlighted with a dark background.
Operating Instructions 911-211-10 - 00.0 - 10/2020
OK
(CR)
( p. 43).
name for sewing, editing or copying.
①
the DAC control or the USB key.
The files present at this location are listed in a selection window (2).
File Filter
File
Copy
>
.
(2) - File selection window
to make the list more manageable
②
67