Editing An Existing Sequence - DURKOPP ADLER 906 Operating Instructions Manual

Removing a seam program from a sequence
1. Tap the seam program in the Sequence field and tap the Delete button.
 The program is removed from the sequence.
Assigning a name to the sequence
To assign a name to a sequence:
1. Tap the Set name button.
 The window for entering the name opens.
2. Enter the desired name.
3. Confirm with OK ( p. 48).
 The sequence is now available under this name for sewing, editing or

5.14 Editing an existing sequence

You can edit an existing sequence by adding or removing seam programs.
Abb. 51: Editing an existing sequence
To edit an existing sequence:
1. Tap the menu items File > Open in the main window ( p. 50).
 The sequence is opened in the main screen.
2. Tap the menu items Edit > Sequence.
 The window for editing the sequence appears.
3. Add programs to the sequence using the Insert button or remove from
62
copying.
the sequence using the Delete button. The steps correspond to the
procedure used for creating a new sequence ( p. 61).
Programming
Operating Instructions 906 - 02.0 - 11/2016