Table of Contents
Advertisement
4.20 Sewing
4.20.1 Start sewing
To start the sewing process:
1. Press the left pedal forward.
The various steps of the positioning sequence are triggered succes-
2. For positioning corrections:
The last step of the positioning sequence is canceled. The workpiece
3. Press the left pedal forward.
The sewing procedure is started.
The following is a brief description of the machines' working methods:
Working method
B
p. 59
F
p. 66
The individual working methods are described on the pages below.
The description is structured as follows:
Positioning points
This item indicates the positioning points used for the different workpieces
(e.g. left and right parts).
Aligning the positioning aids
This section describes how to adjust and align the positioning aids
(e.g. positioning marks, marking lamps, stops, etc.).
Positioning and starting sewing process
This item includes a list of the individual positioning steps illustrated by
typical examples.
58
sively by actuating the left pedal several times.
• Press the pedal back.
can be positioned again.
Explanation
• Piped pockets
• automatic feeding of the piping strip
• with/without incision of the piping ends
• optional automatic feed of flap and additional parts from the
right/left/both sides
• Piped pockets
• automatic feed of piping strip and additional parts
• automatic aligning and feed of the flap
• with/without incision of the piping ends
Operating Instructions 745-35-10 B/745-35-10 F - 00.0 - 04/2017
Operation
Advertisement
Table of Contents
