LOADING THE CURRENT CONFIGURATION USING TFTP
Introduction
The unit supports configuration uploads from a unit (via the
located on the network or a TFTP server accessible across the WAN. This DLP provides the steps for a
successful configuration upload using the
Tools and Materials Required
•
A PC with a Telnet client software
•
A TFTP server accessible on the local network (a TFTP server is provided with the unit as part of the
ADTRAN Utilities software) or a TFTP server accessible across the WAN
•
VT100 compatible terminal or computer with terminal emulation software
•
Appropriate cable to connect terminal to the unit (customer-provided)
•
DB-9 female to RJ-45 female adapter for connecting to the
adapter is ADTRAN-proprietary and is shipped with the unit.
•
Ethernet cable from
•
Use Ethernet crossover if going from the unit to a PC (customer-provided).
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
61200600L1-1A
10/100B
port on the unit to a hub (customer-provided)
10/100B
T
ASE
© 2002 ADTRAN, Inc.
10/100B
T
ASE
Ethernet port and a TFTP server.
T
ASE
port on the rear of the unit. This
CRAFT
Ethernet port) to a TFTP server
161