Terminal Menu And System Control; Selecting The Appropriate Menu - ADTRAN Total Access 600R System Manual

Section 4 User Interface Guide
To do this...
Paste the item stored in the clipboard, if the information is compatible.
You must confirm all pastes except those to a single editable field.
Increment the value of certain types of fields by one when you paste information into
those fields.
Decrement the value of certain types of fields by one when you paste information into
those fields.
Insert a new list item.
For example, add a new item to the T
while the cursor is over the index number.
Delete a list item.
For example, delete an item from the T
while the index number is active.
2.

TERMINAL MENU AND SYSTEM CONTROL

Selecting the Appropriate Menu

The terminal menu is the access point to all other operations. Each terminal menu item has several
functions and submenus that identify and provide access to specific operations and parameters. Use the
chart below to help select the appropriate terminal menu.
To do this...
Review and monitor general system information
Set up the management, syslog, and network time
Upgrade firmware, do config transfers, ping, traceroute, reset unit, and access
terminal mode
Configure and monitor the T1 and Ethernet interfaces.
Configure and monitor the L2 Protocol for the T1 and Ethernet interfaces
Configure and monitor bridging parameters
Define, configure, and monitor all router functions
Configure the filter defines and Radius server
Configure and apply DS0 maps
42
U L connection list by pressing <I>
ELNET SER IST
U L connection list by pressing <D>
ELNET SER IST
© 2002 ADTRAN, Inc.
Total Access 600R System Manual
Press this
key...
P
>
<
I
D
Go to this menu...
S
YSTEM
S
YSTEM
S
YSTEM
I
NTERFACES
L2 P
ROTOCOL
B
RIDGE
R
OUTER
S
ECURITY
DS0 M
APS
61200600L1-1A
I
NFO
C
ONFIG
U
TILITY