System Utility > Config Transfer - ADTRAN Total Access 600R System Manual

Section 4 User Interface Guide
S U > U
YSTEM TILITY
This is required when the transfer method is TFTP. It is the case-sensitive file name which contains the
upgrade code. The factory default is no entry in the
S U > U
YSTEM TILITY
This appears when TFTP is used. It displays the status of the transfer as it happens. Any error or success
message will be displayed here.
S U > U
YSTEM TILITY
This activator is used when the configurable items in this menu are complete. This will initiate the transfer
for either TFTP or XMODEM upgrades.
Before using
default gateway (if required). See DLP-004, Setting Ethernet IP Parameters for more
information.
S U > U
YSTEM TILITY
Use this activator to cancel any TFTP transfer in progress.
S U > C
YSTEM TILITY
Select the config transfer method and perform the transfer from this menu.
S U > C
YSTEM TILITY
Sends a file containing the unit configuration to a PC connected to the
Protocol or to a file on a TFTP server using the
also lets you save the unit configuration as a backup file, so you can use the same
C T
ONFIG RANSFER
configuration with multiple units. In addition,
TFTP server.
To support these transfers, ADTRAN delivers a TFTP program with the unit called TFTP Server. You can
configure any PC running Microsoft Windows with this software, and store a configuration file.
Before using
default gateway (if required). See DLP-004, Setting Ethernet IP Parameters, for more
information.
Only one configuration transfer session (upload or download) can be active at a time.
are supported.
60
F
PGRADE IRMWARE
F
PGRADE IRMWARE
F
PGRADE IRMWARE
, the unit should have a valid IP address, subnet mask, and
S T
TART RANSFER
F
PGRADE IRMWARE
T
ONFIG RANSFER
T > T
ONFIG RANSFER
C
, the unit should have a valid IP address, subnet mask, and
S T
TART RANSFER
© 2002 ADTRAN, Inc.
> TFTP S F
ERVER ILENAME
TFTP S F
ERVER ILENAME
> T S
RANSFER TATUS
> S T
TART RANSFER
> A T
BORT RANSFER
M
RANSFER ETHOD
protocol.
TFTP
can retrieve a configuration file from a
T
ONFIG RANSFER
Total Access 600R System Manual
field.
port using
CRAFT XMODEM
XMODEM
61200600L1-1A
and
TFTP