ADTRAN Total Access 600R System Manual page 107

Total Access 600R System Manual
O
FFSET
Offset from beginning of packet of where to start the pattern comparison. Default is
P
ATTERN
64 bits used for comparison. Values are in hexadecimal format. Default is
M
ASK
Bits in the pattern to be compared. Values are in hexadecimal format. Default is
00:00:00:00:00:00:00:00
S > F
ECURITY ILTERS
The IP filter defines apply to any IP packet, whether it is routed or bridged. Up to 32 IP defines can be
specified.
N
UM
Indicates the entry number in the IP Filter Defines table.
N
AME
Identifies the filter entry. Default is no entry in
S A
RC DDR
IP address compared to the source address. Value is in dotted decimal format. Default is
S M
RC ASK
Bits which are used in the source comparison. Value is in dotted decimal format. Default is
D A
EST DDR
IP address compared to the destination address. Value is in dotted decimal format. Default is
D M
EST ASK
Bits which are used in the destination comparison. Value is in dotted decimal format. Default is
0.0.0.0.
S P
RC ORT
IP source port number used for comparison. Value is in decimal format. Range:
is .
0
61200600L1-1A
.
> F D > IP F
ILTER EFINES
© 2002 ADTRAN, Inc.
Section 4 User Interface Guide
D
ILTER EFINES
field.
N
AME
.
0
00:00:00:00:00:00:00:00
.
0.0.0.0
0.0.0.0
0.0.0.0.
. Default
0 65535
TO
.
.
107