Security; Security > Filters - ADTRAN Total Access 600R System Manual

Total Access 600R System Manual
S
ECURITY
Configure the
S
ECURITY
S > F
ECURITY ILTERS
Configure the filter characteristics from this menu.
S > F
ECURITY ILTERS
The unit can filter packets based on certain parameters within the packet. The method used by the unit
allows the highest flexibility for defining filters and assigning them to a PVC or PPP link. The filters are
set up in two steps: (1) defining the filter types, and (2) applying them to a list under the PVC or PPP
configuration. This menu is used to define the individual filter defines based on packet type.
The Filter Defines option works for Frame Relay and PPP.
S > F
ECURITY ILTERS
The MAC filter is applied to bridge packets only. Bridge packets which are forwarded by the bridge
functionality of the unit are defined here. Up to 32 MAC defines can be specified.
61200600L1-1A
and
F R S
ILTERS ADIUS ERVER
Figure 10. Security Menu
> F D
ILTER EFINES
> F D > MAC F
ILTER EFINES
© 2002 ADTRAN, Inc.
Section 4 User Interface Guide
parameters from this menu as shown in Figure 10.
D
ILTER EFINES
105