ADTRAN Total Access 600R System Manual page 106

Section 4 User Interface Guide
N
UM
Indicates the entry number in the MAC Filter Defines table.
N
AME
Identifies the filter entry. Default is no entry in
S A
RC DDR
48-bit MAC source address used for comparison. Values are in hexadecimal format. Default is
00:00:00:00:00:00
S M
RC ASK
Bits in the MAC source address which are compared. Values are in hexadecimal format. Default is
00:00:00:00:00:00
D A
EST DDR
48-bit MAC destination address used for comparison. Values are in hexadecimal format. Default is
00:00:00:00:00:00
D M
EST ASK
Bits in the MAC destination address used for comparison. Values are in hexadecimal format. Default
is
00:00:00:00:00:00
T
YPE
16-bit type field used for comparison. Values are in hexadecimal format. Default is
T M
YPE ASK
Bits in the type field used for comparison. Values are in hexadecimal format. Default is
S > F
ECURITY ILTERS
The pattern filter is applied to bridge packets only. That is any packet which is forwarded by the bridge
functionality of the unit. Up to 32 pattern defines can be specified.
N
UM
Indicates the entry number in the Pattern Filter Defines table.
N
AME
Identifies the filter entry. Default is no entry in
106
.
.
.
.
> F D > P
ILTER EFINES
© 2002 ADTRAN, Inc.
Total Access 600R System Manual
field.
N
AME
F D
ATTERN ILTER EFINES
field.
N
AME
.
00:00
.
00:00
61200600L1-1A