Edit Menu - ADTRAN Total Access 600R System Manual

Total Access 600R System Manual
Host Name
Accepts and stores host names. You may enter a name, an IP address, or a domain name directly from
this field. Click on the drop-down arrow to display a complete list of previously stored host names.
P
ORT
Provides several port options. You may enter port numbers directly into this field to connect to
non-standard ports or select the drop-down combo-box to display the following options:
T
ELNET
E
CHO
D
ISCARD
D
AYTIME
C
HARGEN
Edit Entry
Changes either the unit name or the IP address of each
host. Press either
number in the IP address to move to the next field. If you
press or
Return (.)
field, that field entry is deleted.
Add New
Prompts you for the same information as the
dialog box for new host. When enabled, the
request
D L
OMAIN
name then appears in the
Delete
Removes a host name from the list; simply select the host name you want to remove, and, at the
prompt, click
D
ELETE
Connect
Establishes the Telnet session.
Disconnect
Terminates the Telnet session.
To re-establish the session, select
action restores the previous connection.
Transfer Cfg
This feature is used with ADTRAN products primarily for sending configuration files to the unit.
Exit
Ends the Telnet session and closes the Telnet screen.

Edit Menu

Provides and
C P
OPY ASTE
61200600L1-1A
establishes a Telnet session
provides a loopback for troubleshooting
bit bucket; discards data
returns the time
displays as a unique character stream; used for self-tests
or a
Tab, Return, period (.
while the cursor is located in each IP
via a DNS server on the network rather than specifying an IP address. The
U
OOK P
field.
H N
OST AME
.
C
ONNECT
commands.
© 2002 ADTRAN, Inc.
) after each
E E
DIT NTRY
(Domain Name Server) feature allows users to
U DNS
SE
from or press
S M
ESSION ENU
Section 6 ADTRAN Utilities
three times. This
<E >
NTER
183