ADTRAN Total Access 600R System Manual page 109

Hide thumbs Also See for Total Access 600R:
Table of Contents

Advertisement

Total Access 600R System Manual
S
> F
ECURITY
ILTERS
The unit can block packets in and out of an interface by use of the filters. They are set up in two steps:
1) define the types of packets that would be of interest in the
and 2) set up the filter type and combination of defines that will cause a packet block.
S
> F
ECURITY
ILTERS
Define the filters for the T1 interfaces from this menu.
The T1 interface will only appear in the
P
ROTOCOL
S
> F
ECURITY
ILTERS
If the
is
L2 P
F
ROTOCOL
T1 physical and logical ports, respectively. The T1 physical port is always 0. The X represents the Frame
Relay logical port and will always be a number 0-9 corresponding to the interface number under
L2 P
> C
ROTOCOL
ONFIG
If the
is
L2 P
PPP
ROTOCOL
logical ports, respectively. This is a read-only field.
S
> F
ECURITY
ILTERS
Enable the T1 interface filtering and define filters from this menu.
I
VC
N FROM
The packets which come into the unit can be filtered in three ways:
D
(
ISABLE
DEF
B
A
LOCK
LL
F
ORWARD
I
E
N
XCEPTIONS
This is a list of up to 32 filter entries which can be combined using the operations field. The
operations are performed in the order they appear on the list.
61200600L1-1A
> I
NTERFACES
> I
(T1[0])
NTERFACES
is set to
F
R
RAME
ELAY
> I
(T1[0]) > S
NTERFACES
, the
R
-
RAME
ELAY
SUB
INTERFACE
. This is a read-only field.
> DLCI M
APPING
, the
-
SUB
INTERFACE
> I
(T1[0]) > S
NTERFACES
)
Turns off packet input filtering. No incoming packets are blocked.
All incoming packets from the WAN are blocked except as defined
in the
S
ECURITY
list.
A
No incoming packets from the WAN are blocked except as defined
LL
in the
S
ECURITY
list.
© 2002 ADTRAN, Inc.
S
ECURITY
S
> F
ECURITY
ILTERS
or
.
PPP
-I
UB
NTERFACE
will be
FRE [0.X]
is
. The [0.0] represents the T1 physical and
PPP [0.0]
-
ET
UP
> F
> I
ILTERS
NTERFACES
> F
> I
ILTERS
NTERFACES
Section 4 User Interface Guide
> F
> F
D
ILTERS
ILTER
EFINES
list if the
> I
NTERFACE
, where the [0.X] represents the
> S
> I
E
ETUP
N
XCEPTIONS
> S
> I
E
ETUP
N
XCEPTIONS
menu,
L2
109

Advertisement

Table of Contents
loading

Table of Contents