Adding/Removing Telnet Users And Changing Password Security Levels - ADTRAN Total Access 600R System Manual

ADDING/REMOVING TELNET USERS AND CHANGING PASSWORD
Introduction
All menu items in the unit are protected by passwords of varying security levels. By assigning different
passwords to different security levels, the System Administrator can control which users can view or
change various menu items. You can assign multiple passwords at the same access level. This way,
different users with the same access privileges can have different passwords. This procedure details the
steps which must be performed to add/remove user profiles and assign password security levels in the unit.
Tools and Materials Required
• VT100 compatible terminal or computer with terminal emulation software
• Appropriate cable to connect terminal to the unit (customer-provided)
• DB-9 female to RJ-45 female adapter for connecting to the
adapter is ADTRAN-proprietary and is provided with the unit.
• Ethernet cable from the
• Use Ethernet crossover if going from the unit to a PC (customer-provided).
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
61200600L1-1A
SECURITY LEVELS
port on the unit to a hub (customer-provided)
10/100B T
ASE
© 2002 ADTRAN, Inc.
port on the rear of the unit. This
CRAFT
135