Security > Radius Server - ADTRAN Total Access 600R System Manual

Section 4 User Interface Guide
A
CTIVE
Turns this entry active when set to
T
YPE
Selects the filter define list to reference (default is
MAC
P
ATTERN
IP
F L N
ILTER IST AME
Selects between filters defined in the list. Default is no entry in filter list name.
N O
EXT PER
The next operation to use to combine with the next filter in the list (default is
END
AND
OR
S > R
ECURITY ADIUS
The parameters for the
Telnet radius is only available in A.04 firmware or later.
S > R
ECURITY ADIUS
This is the IP address of the first
authenticating a Telnet session. Default is
S > R
ECURITY ADIUS
This is the IP address of the second
primary server does not respond. Default is
114
Y
ES
from the
D
EFINES
from the
F
ILTER
from the
D
EFINES
the last filter to combination.
logically AND this filter with the next filter in the list.
logically OR this filter with the next filter in the list.
S
ERVER
are configured in this menu.
RADIUS S
ERVER
S > S
ERVER ERVER
R S
ADIUS ERVER
0.0.0.0
S > S
ERVER ERVER
R S
ADIUS ERVER
0.0.0.0
© 2002 ADTRAN, Inc.
Default is
. N .
O
):
MAC
S > F
ECURITY ILTERS
list.
S > F
ECURITY ILTERS
list.
D
EFINES
S > F
ECURITY ILTERS
list.
1
the unit should attempt to communicate with when
.
2
the unit should attempt to communicate with when the
.
Total Access 600R System Manual
> F D > MAC F
ILTER EFINES
> F D > P
ILTER EFINES ATTERN
> F D > IP F
ILTER EFINES
):
E
ND
61200600L1-1A
ILTER
ILTER