UPGRADING THE FIRMWARE USING TFTP
Introduction
The unit supports firmware updates via the
server or the
interfaces using XMODEM. The unit also supports TFTP updates across the WAN
CRAFT
using the data/router channels. This DLP provides the steps to follow for a successful firmware upgrade
using the
10/100B
T
ASE
Tools and Materials Required
•
A TFTP Server accessible on the local network (a TFTP server is provided with the unit as part of the
ADTRAN Utilities software) or a TFTP server accessible across the WAN
•
VT100 compatible terminal or computer with terminal emulation software
•
Appropriate cable to connect terminal to the unit (customer-provided)
•
DB-9 female to RJ-45 female adapter for connecting to the
adapter is ADTRAN-proprietary and is shipped with the unit.
•
Ethernet cable from
•
Use Ethernet crossover if going from the unit to a PC (customer-provided).
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
61200600L1-1A
10/100B
Ethernet port and a TFTP Server.
port on the unit to a hub (customer-provided)
10/100B
T
ASE
© 2002 ADTRAN, Inc.
Ethernet port using either TFTP from a network
T
ASE
port on the rear of the unit. This
CRAFT
153