ADTRAN Total Access 600R System Manual page 155

Total Access 600R System Manual
Prior to the start of the upgrade, the transfer status will display
status messages display in T
these messages.
Message
Transferring... [X KB] Indicates communication with the TFTP network server has been
Flash Programmed
Successfully
Loaded code
ver x.x.x
chksum = xxxx
Resetting....
RECV Error
Host Timeout
idle
9. When the update has successfully completed, F
in the T S
RANSFER TATUS
message. Finally the T
The unit will restart immediately and resume operation. After giving the unit sufficient time to reboot,
the user may Telnet back into the unit and log in.
For WAN Upgrades
1. Telnet into the unit using F
and Changing Password Security Levels).
2. Verify the TFTP server is running on the network. Verify that the unit can ping the TFTP server.
3. Go to the S U
YSTEM
4. Go to the T
RANSFER
5. Set the TFTP S
ERVER
If using ADTRAN utilities, this will be the IP address that appears in the TFTP S
S
TATUS
6. Enter the filename of the update file into the TFTP S
7. Select S T
TART RANSFER
61200600L1-1A
S
RANSFER TATUS
established and the update file is being transferred between the unit and
the TFTP network server.
The unit has been upgraded successfully.
Unit displays the version and checksum of the upgraded code.
Unit is power cycling.
Unit will display this message if server filename is incorrect.
Unit will display this message if TFTP server address is incorrect.
The upgrade has not yet been initiated.
field. This will be followed by a L
S field will display R
RANSFER TATUS
or S levels (refer to DLP-003, Adding/Removing Telnet Users
ULL UPPORT
menu and select the U
TILITY
M menu and select TFTP.
ETHOD
A to the IP address of the machine running the TFTP server program.
DDRESS
window.
to start the update. Enter Y to confirm the upgrade.
© 2002 ADTRAN, Inc.
. During the TFTP upload, various
I
DLE
to indicate progress. The following table describes
Meaning
P S
LASH ROGRAMMED UCCESSFULLY
C
OADED ODE VER X
...
ESETTING
F menu; press <Enter>.
PDATE IRMWARE
F field.
ERVER ILENAME
Section 5 DLP-008
will display briefly
. . C =
X X HKSUM XXXX
ERVER
155