ADTRAN Total Access 600R System Manual page 115

Total Access 600R System Manual
S > R
ECURITY ADIUS
This is the IP address of the third
authenticating a Telnet session. Default is
S > R
ECURITY ADIUS
This is the UDP port the unit should use when communicating with the
, which is the commonly used port.
1812
S > R
ECURITY ADIUS
The and unit share this text string. It is used by the
R S
ADIUS ERVER
the RADIUS client. The factory default is not to use a secret.
S > R
ECURITY ADIUS
This is the number of times the unit should send a request packet to the
before giving up. If the number of attempts to communicate with the primary server is equal to the retry
count, the second server (if defined) is tried. If the second server does not respond within the retry count,
the third server (if defined) is tried. If the third server does not respond within the retry count, the Telnet
session is not authenticated and is dropped. The default is
61200600L1-1A
S > S 3
ERVER ERVER
R S
ADIUS ERVER
0.0.0.0
S > UDP P
ERVER ORT
S > S
ERVER ECRET
S > R C
ERVER ETRY OUNT
© 2002 ADTRAN, Inc.
the unit should attempt to communicate with when
.
R
R
ADIUS
(1-10)
R
.
5
Section 4 User Interface Guide
. The default is
S
ADIUS ERVER
to authenticate the unit,
S
ERVER
without a response
S
ADIUS ERVER
115