System Utility > Ping - ADTRAN Total Access 600R System Manual

Section 4 User Interface Guide
S U > S
YSTEM TILITY
C A CPU U
URRENT VG TILIZATION
S U > S
YSTEM TILITY
This activator will clear all the system utilization performance stats.
S U > P
YSTEM TILITY
Activate the ping test and define the ping packet characteristics from this menu.
S U > P
YSTEM TILITY
Activator to start and cancel a ping test.
Only one ping session can be active at a time.
S U > P
YSTEM TILITY
IP address or domain name (if DNS is configured) of device to receive the ping. The factory default is no
entry in the host address field.
S U > P
YSTEM TILITY
Selects whether the ping packet should use the
as the source address of the ping packet. This is the address that is used for ICMP requests.
means it will use the IP address associated with the WAN for outgoing packets and the Ethernet IP address
for ICMP requests made on the LAN.
address for outgoing ICMP requests. Default is
S U > P
YSTEM TILITY
Total size of the ping to send. Range is
S U > P
YSTEM TILITY
Total packets to send every 2 seconds. Setting this to
.
5
S U > P
YSTEM TILITY
Total packets sent (read-only).
S U > P
YSTEM TILITY
Total packets received (read-only).
62
U > P
YSTEM TILIZATION
is the running total of CPU utilization since the last clear.
U
YSTEM TILIZATION
ING
> S /S
ING TART TOP
> H A
ING OST DDRESS
> S A
ING OURCE DDRESS
NAPT A
> S (40-1500)
ING IZE
to
40 1500
> # P
ING OF ACKETS
> # T
ING RANSMITS
> # R
ING ECEIVES
© 2002 ADTRAN, Inc.
> C
ERFORMANCE
> P > C
ERFORMANCE
address or the
I
NTERFACE
will replace the WAN IP address with the NAPT
DDRESS
.
I
NTERFACE
bytes. The default is
allows the client to ping continuously. The default is
0
Total Access 600R System Manual
A CPU U
URRENT VG
S
LEAR TATS
(if that interface uses NAT)
NAPT
I
NTERFACE
.
64
61200600L1-1A
TILIZATION