ADTRAN Total Access 600R System Manual page 154

Section 5 DLP-008
Perform Steps Below in the Order Listed
For LAN Upgrades
1. Connect to the unit using the 10/100B
If you are not already connected to the unit's
procedure in DLP-006, Telnetting to the Unit, to connect to the unit.
2. Verify the TFTP server is running on the network. The user may ping the TFTP server from the unit to
verify communication.
A TFTP server ships as part of the ADTRAN utilities. If using ADTRAN utilities, choose
S >P
TART
3. Download the firmware upgrade file to your computer.
If using ADTRAN utilities, save the upgrade file to the "ADTNUTIL" directory on your
hard drive.
4. Go to the S U
YSTEM
5. Go to the T
RANSFER
6. Set the TFTP S
ERVER
If using ADTRAN utilities, this will be the IP address that appears in the TFTP S
S
TATUS
7. Enter the filename of the update file into the TFTP S
8. Select S T
TART RANSFER
154
DLP-008
T interface.
ASE
>ADTRAN U
ROGRAMS
menu and select the U
TILITY
M menu and select TFTP.
ETHOD
A to the IP address of the machine running the TFTP server program.
DDRESS
window.
to start the update. Enter Y to confirm the upgrade.
© 2002 ADTRAN, Inc.
Total Access 600R System Manual
port using Telnet client software, use the
10/100B T
ASE
>TFTP S
TILITIES ERVER
F menu; press <Enter>.
PDATE IRMWARE
F
ERVER ILENAME
to start the server.
field.
61200600L1-1A
ERVER