At+Qcfgext="Nipdr" Retrieve Mt Non-Ip Data - Quectel BG96 NIDD At Command Manual

2.1.5. AT+QCFGEXT="nipdr" Retrieve MT Non-IP Data

AT+QCFGEXT="nipdr" Retrieve MT Non-IP Data
Write Command
AT+QCFGEXT="nipdr"[,<read_length
>]
Write Command
When <read_length> is 0, query the
retrieved data:
AT+QCFGEXT="nipdr",0
Parameter
<read_length>
<read_actual_length>
<data>
<total_receive_length>
<have_read_length>
<unread_length>
<err>
BG96_NIDD_AT_Commands_Manual
Response
If the connection has received data, response:
+QCFGEXT: "nipdr",<read_actual_length>,<data>
OK
If there is no data that can be retrieved, response:
+QCFGEXT: "nipdr",0
OK
If there is an error related to ME functionality, response:
+CME ERROR: <err>
If there is any other error, response:
ERROR
Response
If the connection has existed, response:
+QCFGEXT:
"nipdr",<total_receive_length>,<have_read_length>,<unr
ead_length>
OK
If there is an error related to ME functionality, response:
+CME ERROR: <err>
If there is any other error, response:
ERROR
Integer type. The data length to be retrieved. Unit: byte.
The actual length of retrieved data. Unit: byte.
String type. Retrieved data.
The total length of received data. Unit: byte.
The length of read data. Unit: byte.
The length of unread data. Unit: byte.
Integer type. The error code of the operation. Please refer to Chapter 3 for
LTE Module Series
BG96 NIDD Commands Manual
9 / 13