Terms And Abbreviations - ABB ACH580-01 Hardware Manual

Task
Check the installation.
Commission the drive.

Terms and abbreviations

Term
ACH-AP-H
ACH-AP-W
BACnet™
Brake chopper
Brake resistor
Capacitor bank
CCA-01
CDPI-01
CHDI-01
CMOD-01
CMOD-02
Control unit
CPTC-02
DC link
DC link capacitors
DPMP-01
DPMP-02, DPMP-03
DPMP-EXT
Drive
EFB
EMC
FBA
FBIP-21
FCAN
Description
Assistant control panel with Hand-Off-Auto functionality
Assistant control panel with Hand-Off-Auto functionality and Bluetooth inter-
face
A network protocol (Building Automation and Control Networks)
Conducts the surplus energy from the intermediate circuit of the drive to
the brake resistor when necessary. The chopper operates when the DC
link voltage exceeds a certain maximum limit. The voltage rise is typically
caused by deceleration (braking) of a high inertia motor.
Dissipates the drive surplus braking energy conducted by the brake chopper
to heat
The capacitors connected to the DC link
Configuration adapter
Communication adapter module
115/230 V digital input extension module
Multifunction extension module (external 24 V AC/DC and digital I/O exten-
sion)
Multifunction extension module (external 24 V AC/DC and isolated PTC
interface)
The part in which the control program runs.
Multifunction extension module (external 24 V and ATEX/UKEX-certified
PTC interface)
DC circuit between rectifier and inverter
Energy storage which stabilizes the intermediate circuit DC voltage
Mounting platform for control panel (flush mounting)
Mounting platform for control panel (surface mounting)
Optional mounting platform for door mounting of control panel
Frequency converter for controlling AC motors
Embedded fieldbus
Electromagnetic compatibility
Fieldbus adapter
BACnet/IP adapter module
Optional CANopen® adapter module
Introduction to the manual 29
See
Installation checklist (page 209)
ACH580 HVAC control program firmware
manual (3AXD50000027537 [English])