Timers; Comparator Operator; Comparator Value; Sl Controller Timer - Danfoss VLT Programming Manual

3 Parameter Description

13-11 Comparator Operator

Array [6]
Option:
[0] * <
3
≈ (equal)
[1]
[2] >

13-12 Comparator Value

Array [6]
Range:
Application [-100000.000 - 100000.000 N/A]
dependent*

3.13.4 13-2* Timers

This parameter group consists of timer parameters.
Use the result (TRUE or FALSE) from
par. 13-40 Logic Rule Boolean 1
(i.e. Start timer 1 [29]) until the timer value entered in this parameter is elapsed. Then it becomes TRUE again.
All parameters in this parameter group are array parameters with index 0 to 2. Select index 0 to program Timer 0, select index 1 to program Timer 1,
and so on.

13-20 SL Controller Timer

Array [3]
Range:
Application [Application dependant]
dependent*
3.13.5 13-4* Logic Rules
Combine up to three boolean inputs (TRUE / FALSE inputs) from timers, comparators, digital inputs, status bits and events using the logical operators
AND, OR, and NOT. Select boolean inputs for the calculation in par. 13-40
Rule Boolean 3 . Define the operators used to logically combine the selected inputs in par. 13-41
2
.
Priority of calculation
The results of par. 13-40 Logic Rule Boolean 1
(TRUE / FALSE) of this calculation is combined with the settings of par. 13-43
final result (TRUE / FALSE) of the logic rule.
13-40 Logic Rule Boolean 1
Array [6]
Option:
[0] * False
[1] True
136
Function:
Select < [0] for the result of the evaluation to be TRUE, when the variable selected in
par. 13-10 Comparator Operand
result will be FALSE, if the variable selected in par. 13-10
fixed value in par. 13-12
Select ≈ [1] for the result of the evaluation to be TRUE, when the variable selected in
Comparator Operand
par. 13-10
Value .
Select > [2] for the inverse logic of option < [0].
Function:
Enter the 'trigger level' for the variable that is monitored by this comparator. This is an array pa-
rameter containing comparator values 0 to 5.
timers event
directly to define an
, par. 13-42 Logic Rule Boolean 2 or par. 13-44
Function:
Enter the value to define the duration of the FALSE output from the programmed timer. A timer is
only FALSE if it is started by an action (i.e.
elapsed.
, par. 13-41 Logic Rule Operator 1
Function:
Enters the fixed value of FALSE in the logic rule.
Enters the fixed value TRUE in the logic rule.
MG.11.C9.02 - VLT
VLT
is smaller than the fixed value in par. 13-12
Comparator Value
.
is approximately equal to the fixed value in par. 13-12
SL Controller Event
(see par. 13-51 ), or as boolean input in a
Logic Rule Boolean 3 ). A timer is only FALSE when started by an action
Start timer 1
[29]) and until the given timer value has
Logic Rule Boolean 1 , par. 13-42 Logic Rule Boolean 2
Logic Rule Operator 1
and par. 13-42 Logic Rule Boolean 2
Logic Rule Operator 2
and par. 13-44
® is a registered Danfoss trademark
®
HVAC Drive Programming Guide
Comparator Value . The
Comparator Operand is greater than the
Comparator
logic rule
and par. 13-44 Logic
and par. 13-43 Logic Rule Operator
are calculated first. The outcome
Logic Rule Boolean 3
, yielding the
(see