Lcp Keypad - Danfoss VLT Programming Manual

®
VLT HVAC Drive Programming Guide
0-37 Display Text 1
Range:
0 N/A* [0 - 0 N/A]
0-38 Display Text 2
Range:
0 N/A* [0 - 0 N/A]
0-39 Display Text 3
Range:
0 N/A* [0 - 0 N/A]

3.2.6 LCP Keypad, 0-4*

Enable, disable and password protect individual keys on the LCP.
0-40 [Hand on] Key on LCP
Option:
[0] Disabled
[1] * Enabled
[2] Password
[3] Enabled without OFF
[4] Password without OFF
[5] Enabled with OFF
[6] Password with OFF
Function:
In this parameter it is possible to write an individual text string for display in the LCP or to be read
via serial communication. If to be displayed permanently select Display Text 1 in par. 0-20
Line 1.1 Small Display Line 1.2 Small
, par. 0-21
Line 2 Large Display Line 3 Large
or par. 0-24
◀ ▶
character. Use the and buttons to move the cursor. When a character is highlighted by the
cursor, it can be changed. Use the
can be inserted by placing the cursor between two characters and pressing
Function:
In this parameter it is possible to write an individual text string for display in the LCP or to be read
via serial communication. If to be displayed permanently select Display Text 2 in par. 0-20
Line 1.1 Small , par. 0-21 Display Line 1.2 Small
Line 2 Large Display Line 3 Large
or par. 0-24
◀ ▶
character. Use the and buttons to move the cursor. When a character is highlighted by the
cursor, this character can be changed. A character can be inserted by placing the cursor between
▲ ▼
two characters and pressing or
Function:
In this parameter it is possible to write an individual text string for display in the LCP or to be read
via serial communication. If to be displayed permanently select Display Text 3 in par. 0-20
Line 1.1 Small ,par. 0-21 Display Line 1.2 Small
Line 2 Large Display Line 3 Large
or par. 0-24
◀ ▶
character. Use the and buttons to move the cursor. When a character is highlighted by the
cursor, this character can be changed. A character can be inserted by placing the cursor between
▲ ▼
two characters and pressing or
Function:
No function
[Hand on] Key enabled
Avoid unauthorized start in Hand mode. If par. 0-40
Personal Menu, then define the password in par. 0-65
Main Menu Password
the password in par. 0-60
MG.11.C9.02 - VLT ® is a registered Danfoss trademark
3 Parameter Description
Display Line 1.3 Small
, par. 0-22
▲ ▼
. Use the or buttons on the LCP to change a
▲ ▼
or buttons on the LCP to change a character. A character
, par. 0-22 Display Line 1.3 Small
▲ ▼
. Use the or buttons on the LCP to change a
.
, par. 0-22 Display Line 1.3 Small
▲ ▼
. Use the or buttons on the LCP to change a
.
[Hand on] Key on LCP
Personal Menu Password
.
Display
Display
, par. 0-23
3
▲ ▼
or .
Display
, par. 0-23 Display
Display
, par. 0-23 Display
is included in the My
. Otherwise define
43