Dst/Summertime; Dst/Summertime Start; Dst/Summertime End; Clock Fault - Danfoss VLT Programming Manual

®
VLT HVAC Drive Programming Guide

0-74 DST/Summertime

Option:
[0] * Off
[2] Manual

0-76 DST/Summertime Start

Range:
Application [Application dependant]
dependent*

0-77 DST/Summertime End

Range:
Application [Application dependant]
dependent*

0-79 Clock Fault

Option:
[0] * Disabled
[1] Enabled
0-81 Working Days
Array with 7 elements [0] - [6] displayed below parameter number in display. Press OK and step between elements by means of
the LCP.
Option:
[0] * No
[1] Yes
0-82 Additional Working Days
Array with 5 elements [0] - [4] displayed below parameter number in display. Press OK and step between elements by means of
the LCP.
Range:
Application [Application dependant]
dependent*
0-83 Additional Non-Working Days
Array with 15 elements [0] - [14] displayed below parameter number in display. Press OK and step between elements by means of
on the LCP.
Range:
Application [Application dependant]
dependent*
Function:
Choose how Daylight Saving Time/Summertime should be handled. For manual DST/Summertime
enter the start date and end date in par. 0-76
time End
.
Function:
Sets the date and time when summertime/DST starts. The date is programmed in the format se-
Date Format
lected in par. 0-71 .
Function:
Sets the date and time when summertime/DST ends. The date is programmed in the format selected
Date Format
in par. 0-71 .
Function:
Enables or disables the clock warning, when the clock has not been set or has been reset due to a
power-down and no backup is installed.
Function:
Set for each weekday if it is a working day or a non-working day. First element of the array is
Monday. The working days are used for Timed Actions.
Function:
Defines dates for additional working days that normally would be non-working days according to
par. 0-81 Working Days .
Function:
Defines dates for additional working days that normally would be non-working days according to
Working Days
par. 0-81 .
MG.11.C9.02 - VLT ® is a registered Danfoss trademark
3 Parameter Description
DST/Summertime Start
and par. 0-77
▲
and
▲
and
▲
DST/Summer-
3
▼
buttons on
▼
buttons on
▼
and buttons
47