Danfoss VLT Programming Manual page 174

3 Parameter Description
18-34 Analog Out X42/9 [V]
Range:
0.000 N/A* [0.000 - 30.000 N/A]
18-35 Analog Out X42/11 [V]
Range:
3
0.000 N/A* [0.000 - 30.000 N/A]
3.17.4 18-5* Ref. & Feedb.
Parameters for reporting the reference and feedback input.
NB!
Sensorless Readout requires set up by MCT10 with sensorless specific plug in.
18-50 Sensorless Readout [unit]
Range:
0.000 Sen- [-999999.999 - 999999.999 Sen-
sorlessU- sorlessUnit]
nit*
174
Function:
Read out of the value of the signal applied to terminal X42/9 on the Analog I/O Card.
The value shown reflects the selection in par. 26-50
Function:
Read out of the value of the signal applied to terminal X42/11 on the Analog I/O Card.
The value shown reflects the selection in par. 26-60
Function:
MG.11.C9.02 - VLT ® is a registered Danfoss trademark
®
VLT HVAC Drive Programming Guide
Terminal X42/9 Output
.
Terminal X42/11 Output
.