8-85 Slave Timeout Errors; Bus Jog - Danfoss VLT Programming Manual

3 Parameter Description

8-85 Slave Timeout Errors

Range:
0 N/A* [0 - 0 N/A]

3.9.9 8-9* Bus Jog

3
Parameters for configuring the Bus Jog.
8-90 Bus Jog 1 Speed
Range:
100 RPM* [Application dependant]
8-91 Bus Jog 2 Speed
Range:
200 RPM* [Application dependant]
8-94 Bus Feedback 1
Range:
0 N/A* [-200 - 200 N/A]
8-95 Bus Feedback 2
Range:
0 N/A* [-200 - 200 N/A]
8-96 Bus Feedback 3
Range:
0 N/A* [-200 - 200 N/A]
114
Function:
Function:
Enter the jog speed. This is a fixed jog speed activated via the serial port or fieldbus option.
Function:
Enter the jog speed. This is a fixed jog speed activated via the serial port or fieldbus option.
Function:
Write a feedback to this parameter via the serial communication port or fieldbus option. This pa-
rameter must be selected in par. 20-00
Feedback 3 Source
par. 20-06 as a feedback source.
Function:
Bus Feedback 1
See par. 8-94 for further details.
Function:
See par. 8-94 Bus Feedback 1 for further details.
MG.11.C9.02 - VLT ® is a registered Danfoss trademark
®
VLT HVAC Drive Programming Guide
Feedback 1 Source Feedback 2 Source
, par. 20-03 or