Fuel System; Throttle Cable Lubrication - Can-Am Renegade 500 Operator's Manual

FUEL SYSTEM

Throttle Cable Lubrication

The throttle cable must be lubricated
with silicone lubricant (P/N 293 600
041) or an equivalent.
WARNING
Always use a silicone-based lubri-
cant. Using another lubricant (like
a water-based lubricant) could
cause the throttle lever/cable stick-
ing or stiffness.
Open the throttle lever housing.
1. Remove these screws
Separate the housing. Slide rubber
protector back to expose throttle ca-
ble adjuster.
1. Cable protector
2. Throttle cable adjuster
3. Lock nut
4. Throttle lever housing
Screw in the throttle cable adjuster.
Remove:
– inner housing protector
1. Inner housing protector
– the cable from the throttle lever
housing.
NOTE: Slide cable in clip slot and re-
move the end of cable from clip.
_____________________
111